Archive for the ‘1952 Cruiser’ Category
Building the new frame
August 23rd, 2006
We’ve built the frame that will ride under the 1952 Cruiser. This frame is deeper and stronger than the old one, with room to accommodate holding tanks.
In the photos, you can see the new frame resting on the remains of the old frame. Note that the A-frame (tongue area) is considerably longer. This will allow for installation of a tongue-mounted generator or other options. We also included a space below for a spare to be mounted, much like current model Airstreams.
The bottom picture shows the new frame all painted up and ready to go. The tongue will accept a 2-5/16″ ball so the client can use the same hitch ball as he uses to carry his late-model Airstream.
Posted in -All Trailer Restorations, 1952 Cruiser | Comments (2)
Body off
July 30th, 2006
With the frame completely shot, there was no choice but to remove the shell from the frame and start planning an entirely new frame. But that’s OK. The client wants holding tanks for boondocking, which this trailer didn’t have originally. Modifying it to current-day standards would probably have required extensive frame modification anyway. This way, we can start with an entirely new frame that is rock-solid and designed for the new floorplan.
Without the floor and frame attached, an Airstream shell is very floppy. So we built an internal frame of wood to temporarily hold the shell (picture above).
Then we very carefully lifted the body off the old frame. You can see “liftoff” in the picture below. You can also see the rotted and missing crossmembers of the old frame.
The shell is now resting on a temporary flatbed while we use the old frame as a template for the new one. We are lengthening the tongue 6″ to allow for more equipment, and other design changes will be posted in future blog entries. Stay tuned!
Posted in -All Trailer Restorations, 1952 Cruiser | Comments (2)
Gutting the ‘52 Cruiser
July 30th, 2006
All good projects start with a good gutting. In this case, there wasn’t much interior left to the Cruiser, but what we found was nasty. Skeletal remains of snakes, burn marks from faulty wiring, rotted floor and frame members, contamination of the insulation, etc.
Everything came out, including the interior aluminum walls. We pressure-washed the interior to ensure completely clean aluminum.
The frame and floor were utterly shot. Note the wood 2×4s someone had scabbed in the frame as a desperate measure to hold the trailer together.
Posted in -All Trailer Restorations, 1952 Cruiser | Comments (0)